This under-discussion topic “Risk Assessment for Brickwork &
Blockwork “will enhance awareness and provide clear guidelines and direction in
identifying hazards and risks and prevention initiatives to help eliminate the
risk of physical injury specific to Brickwork & Blockwork work tasks. This Risk
assessment Brickwork & Blockwork uploaded by QHSE documents for the ” Brickwork
& Blockwork” is in editable and ready-to-use format and will answer
various answers to the questions such as What are the 5 types of risk
assessment? What are the 4 risk assessments? What are the four 4 main elements of
the risk assessment process? What are the three types of risk
assessments? block work risk assessment pdf, bricklaying risk assessment
example, block work hazards, bricklaying
risk assessment and method statement, risk assessment for concrete works, plastering
risk assessment pdf, bricklaying method statement example, etc. To download
more health and safety documents such as risk assessments, risk assessments,
safety forms, and checklists, keep visiting the site regularly.
1. SIGNIFICANT HAZARDS IDENTIFIED
- Falls of materials
- Cutting of bricks/blocks
- Silica (SiO2) Dust – Chronic Pulmonary Disease (COPD)
- Working at Height (W@H)
2. STANDARD CONTROL MEASURES
- To minimize and reduce the manual risks to ill health, make sure that the Paving blocks weighing more than 20kg will not be lifted, loaded, unloaded, or transferred manually and must be laid mechanically unless site circumstances make this impractical.
- A brief and detailed Task Risk Assessment (TRA) must be prepared if paving units are more than 20 kilograms are to be laid manually/physically.
MANUAL LAYING
Use mechanical methods and techniques to shift and transfer paviors whenever applicable e.g.:
- Forklift, JCB, etc.
- Essential and proper training in Kinetic Lifting Techniques (KLT) is to be provided to all vehicle or machinery operatives carrying out the task
- Management to make sure that the Kinetic Lifting Techniques (KLT) is being used to prevent injuries
PPE
- Knee pads to be worn.
- Use Impact Resistant Eye Protection (IREP) when cutting paviors.
- Use a dust mask when cutting pavers with discs or if the wind is blowing sand into the air.
MECHANICAL LAYING
- Vacuum lifting will be used following the manufacturer’s instructions by trained operatives
- All lifting gear is to be visually and carefully examined and checked daily and have a current certificate of thorough examination (thorough examination to be conducted after every 6 months)
- Paving blocks will be lifted into place using a vacuum lifter suspended from a suitable machine
- Use Impact Resistant Eye Protection (IREP) when cutting paviors.
- Use a dust mask when cutting pavers with discs or if the wind is blowing sand into the air.
3. CONTROL MEASURES:
- Protective equipment is worn by all personnel and visitors including safety helmets, and safety footwear to BS/EN standards.
- Respiratory protection must be worn when cutting bricks/ blocks:
- Elastomeric Half Facepiece Respirators
- Elastomeric Full Facepiece Respirators
- Filtering Facepiece Respirators
- Powered Air-Purifying Respirators (PAPRs)
- Supplied Air-Respirators
- Self-Contained Breathing Apparatus (SCABA)
- Combination Respirators
- Impact goggles must be worn when cutting bricks/blocks.
- Waste materials are removed from the working area preventing the risk of slip-trip injuries