ELECTRICAL INSPECTIONS CHECKLIST-EQUIPMENT GROUNDING AND BONDING
1.1. Identify equipment that is required to be grounded.
1.2. Verify appropriate grounding methods for equipment fastened in place or connected by permanent wiring methods.
1.3. Verify appropriate types of EGCs.
1.4. Check separate EGCs for proper sizing and identification.
1.5. Check connections of EGCs within outlet boxes.
1.6. Verify that proper methods are used to bond receptacles to boxes.
1.7. Check the installation of equipment bonding jumpers, especially where flexible connections or cords are used.
1.8. Verify the grounding of panel board enclosures and connections of EGCs to metallic enclosures.
1.9. Verify proper grounding at separate buildings or structures.
1.10. Check equipment grounding of electric ranges and clothes dryers.
1.11. Verify bonding of equipment operating at over 250 volts to ground.
1.12. Check installations with isolated grounding conductors for proper connections and for grounding of the associated enclosures and wiring methods.
1.13. Check for occupancies or equipment with special grounding or bonding requirements.
0 Comments